Mipa Brilliant Design Special Effect tints (Various Colours)

Transparent concentrated tinting inks for special-effect painting in combination with Mipa BC or WBC basecoats and Mipa 2K-clearcoats.

Process:

The candy chrome effect is achieved using the Mipa Vicrom Mirror Glaze and Brilliant Design tinters to create an anodized chrome effect. The Mirror Glaze is ready for use and can be applied over either a gloss white or gloss black ground coat for varying effect. The Mirror Glaze must be applied in thin, light coats using a 0.8mm to 1.0mm set up to gain optimum results.

First coat- Apply the first coat of Mirror Glaze

*Flash off 8/10 minutes

Second coat- Apply the second coat of Mirror Glaze

*Flash off 8/10 minutes

Third coat- Apply the third coat of Mirror Glaze

*Flash off 40/45 minutes

Now apply a thin coat of Mipa WBC Beispritzlack (base blend)

*Flash off 5/10 minutes

The Brilliant Design tinted 2K Mipa clear coat may now be applied, with the maximum addition of the BD tinter being 5%. A range of candy colours can be achieved from the BD01(Yellow), BD03(Red) and BD05(Blue) tinters (i.e. blue and yellow to make green/ red and yellow to make orange etc)

Check TDS before use.