FP141 Universal Surfacer can be used for small to large repair work over multiple automotive substrates. It can be applied directly on each coat.
Primed parts and do not require an additional guide coat due to its glossy appearance after drying.

Wet-on-wet:
6 : 1 Surfacer : HS420 Hardener + max 25% Uni Thinner with an open time of 15 minutes to 48 hours

FP141G Universal Surfacer can be used for small to large repair work over multiple automotive substrates, offers outstanding sandability and is sandable within 2 hours at 20⁰C.

Sanding:
6 : 1 Surfacer : HS420 Hardener + max 15% Uni Thinner
2-3 coats
Flash off: 10-15 minutes @ 60 degrees centigrade
Dry to sand: 20-30 minutes @ 60 degrees centigrade or infra Red full bake 7 minutes or 9 minutes on plastic.