Tetrosyl Polyester Resin 

NEW CATALYST SYSTEM – Activate with Tetrosyl hardener part No. EXH001

FOR PROFESSIONAL USE ONLY

Directions For Use

1. Clean surface 

2. Key surface 

3. Refer to application guide and mixing ratios.

Important

Activate with Tetrosyl hardener paste (part no. EXN001). Do not exceed 6g/ml hardener per 100g/ml resin. Mix thoroughly. Ensure all the coloured hardener is dispersed. The more hardener paste used or the warmer the air temperature the faster the resin will set. The table gives an approximate indication of the working times with various amounts of hardener. Excess hardener can retard setting.

NOTE, Thin film thickness in conjunction with low temperatures will slow the cure. This is remedied by application of heat, or use of a thicker film. It is suggested the ambient temperature should be at least 10°C.

AVAILABILITY

1 Litre

2.5 Litre

5 Litre